Top Loading Arms

Emco Wheaton Drum Filling Loading Arm

The Drum Filling Loading Arm is especially designed to load or unload small compartments such as drums or IBC containers. The loading arm has a long reach and is suitable for applications where the manhole or the connection flange cannot be positioned accurately.

The drum filling loading arm can be arrested in the working position. The disadvantages of a traditional hose filling are therefore prevented, i.e. the loading arm cannot slip off the manhole.

The robust design and high quality of the swivel joints provide ease of operation of the loading arm.

Emco Wheaton E2022 - Unsupported Boom Loader

Extended reach makes the Unsupported Boom Loader ideal for applications where a vehicle cannot be accurately spotted, see spotting map. It is designed for heavy use and high flow rates that are typical at large terminals.

Standard arms feature the D2000 World Series Swivel Joint for ultra-low maintenance and the easy to adjust spring cylinder balance.

Vertical movement for easy to handle alignment and out of the way parking.

Emco Wheaton E2025 - Supported Boom Loader

Our E2025 Supported Boom Loaders are the most versatile of all top loading arms. They provide the greatest mis-spot capability and allow for the greatest reach, see spotting map.

Easy to adjust, super-smooth action spring cylinder balance, heavy-duty capacity swivel joints and a custom boom support, enable these arms to reach even further than the E2022 unsupported boom loader.

The standard supported boom loaders have a reach of up to 16 feet. Longer reaches and special requirements are available.

Standard arms feature the D2000 World Series Swivel Joint, a heavy-duty, low profile joint.
A variety of seal configurations and elastomers ensure long life performance for each specific application.

Emco Wheaton E2110 - Fixed Reach Loader

Our E2110 Fixed Reach Loader is designed specifically for single compartment tank trucks and railroad tank cars. Accurate spotting of railcar or tank truck is required, see spotting map.

Standard arms feature the D2000 World Series Swivel Joints for ultra-low maintenance and the easy to adjust spring cylinder balance.

Emco Wheaton E2112 - Variable Reach Loader

Versatility of reach makes the E2112 Variable Reach Loader ideal for applications where more than one compartment can be reached without re-spotting the vehicle.

Also known as a Pantograph Unit, the E2112 is recommended for medium reach applications of less than 11 feet.

Standard arms feature the D2000 World Series Swivel Joints for ultra-low maintenance and the easy to adjust spring cylinder balance.

Emco Wheaton E2611 E2612 - Top Loading Arm for Liquefied Gases

The E2611 E2612 Top Loading Arms are especially designed for the loading and unloading of liquefied gases.

The arm is connected to the rail car compartment by a coupler which provides a fast and safe connection to the valves of the rail car.

The E2612 Loading Arm is combined with a second recommended Vapour Arm E2611.

This loading arm is designed with two end pipes for unloading. A gas return arm with one end pipe allows another use of unloading the rail car under pressure.

The robust and high quality design of the swivel joints and the spring cylinder balancing provides comfortable and smooth handling of the arm.

The E2611 presents an economic and successful solution for selected applications of loading and unloading liquefied hydrocarbon gases.

In distinction to hoses, the piping provides safety from explosion, driveway obstructions and condensate losses at site.

Emco Wheaton E2630 - Top Loading with Vapour Return Hose

Our E2630 Top Loading Arms with Vapour Return Hose are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.

The E2630 consists of our reliable long reach loading arm combined with a hose for vapour return.

By loading with a vapour return hose, the product vapour will be recovered through the loading arm.

This improves the profitability of the terminal because vapourised product can be recovered and vapour does not pollute the environment.

By loading with a sealed manhole, a high level of protection is achieved for both the operator and the environment.

Legal requirements and regulations (e.g. EU-Norm, German TA-Luft) can be met.

The E2630 is the most economical solution for the process of loading with vapour return. Reliable and easy handling is provided by the small weight and little offset. An E2630 may also be used where the available space is limited, e. g. existing loading stations with low roof heights.

Emco Wheaton E2632 - Parallel Loading Arm

E2632 Parallel Loading Arms with vapour return lines are used for hydrocarbons (e.g. gasoline), toxic and aggressive media.

Two boom loaders are connected together to form this loader. All movements are performed in parallel, hence the name: Parallel Arm. The advantages are that the loading arm can be operated like a single arm, i.e. it is highly manoeuvrable. In addition, both the product and vapour recovery lines are free from pockets.

By loading with the vapour return line, the product vapour will be recovered through the loading arm. This improves the profitability of the terminal because vapourised product can be recovered and vapour does not pollute the environment.

By loading with a sealed manhole, a high level of protection is achieved for both the operator and the environment.

Legal requirements and regulations (e.g. EU-Norm, TA-Luft) can be met.

The E2632 is technically the best solution for the process of loading with vapour return. The flow path is free from traps which would retain the condensed vapours and emit fumes when the arm is not in use. The design allows heating of the product and vapour line.

The design of the vapour line with swivel joints provides easy handling, a further advantage against the use of hoses.

Emco Wheaton E2710 - Top Unloading Arm with Heating Line for Rail Cars

The E2710 Top Unloading Arm with Heating Line is especially designed to heat up and unload frozen products.
It is suitable for the top loading / unloading of rail tankers.

Due to the robust and high quality design of the swivel joints, and the precise loading arm balancing, the loading arm is very easy to handle.

By unloading through the nozzles at the end of the drop pipe, hot product will be sprayed into the vessel.

The frozen product in the vessel will be warmed and can be sucked off through the product pipe. The drop pipe can be turned so that the whole vessel can be reached with hot product.

It is possible to fasten a movable holding bar (covering plate) for a level controller. The up and down movement of the A-length is provided by a pneumatic or hydraulic cylinder.

Emco Wheaton E2800 to E2803 E2808 to E2811 - Supported Boom Arms

Supported Boom Arms are designed to handle all media and are suitable for the top loading of road or rail tankers using the manhole.

The loading arms have a long reach and are suitable for applications where the manhole cannot be accurately positioned.

Because of the robust and high quality design of the swivel joints and the precise loading arm balancing, handling of the loading arm is effortless.
Due to its strong design, this loading arm can be equipped with all required accessories.

Emco Wheaton E2804, E2805, E2812, E2813 - Fixed Reach Loader

Fixed Reach Loaders are especially designed for the top loading of road or rail tankers (petroleum and chemical applications) using the manhole.

The loading arm has a fixed reach and is suitable for applications where the manhole can be accurately positioned.

Due to the robust and high quality design of the swivel joints, and the precise loading arm balancing, handling of the loading arm is effortless.

Emco Wheaton E2806 E2807 E2814 E2815 - Variable Reach Loader

The Variable Reach Loader is especially designed for the top loading of road or rail tankers (petroleum and chemical applications) using the manhole.

The loading arm has a variable reach and is suitable for applications where the manhole cannot be positioned accurately.

Due to the robust and high quality design of the swivel joints, and the precise loading arm balancing, handling of the loading arm is effortless.

Emco Wheaton E2816 to E2819 E2615 to E2618 - Loading Arm with Fixed Connection

The Loading Arm with Fixed Connection is especially designed to load chemical products.

It is suitable for the top loading of road or rail tankers using the manhole. The loading arm has a long reach and is suitable for applications where the manhole cannot be accurately positioned.

Due to the robust and high quality design of the swivel joints, and the precise loading arm balancing, handling of the loading arm is effortless.
These variants of loading arm are equipped with an additional swivel joint to ensure the flange connection remains horizontal when coupling to road or railcar tankers.

Emco Wheaton WE2800 EB2804 EB2800 - World Series Top Loader

The World Series Top Loader has been especially designed to the international petroleum industry requirements. Due to its standardised design, it is the most economical solution for this application.

This type of loading arm is designed for the top loading of road or rail tankers using the manhole.

Due to the robust and high quality design of the swivel joints, and the precise loading arm balancing, handling of the loading arm is effortless.

To ensure long life, carbon steel swivel joints with flame hardened ball race are fitted.